Kidde KA-F2 Quick Convert Adapter
The quick convert adapter allows the installation of a new Kidde alarm to an existing competitive wiring harness. This allows for easy installation when replacing the specified smoke alarm brands with a Kidde product.
The smoke alarm adapter also allows the specified approved brands and models to be interconnected with other Kidde product.
This adapter can only be used when replacing Firex models; FADC, ADC, AND AD. These models have been tested for interconnect compatibility with the Kidde alarm models; 1235, 1275, 1276, 1285, i12020, i12040, i12060, i12080, i4618, PE120, PI2000, KN-COSM-IB, KN-COB-IC, KN-COP-IC, AND RF-SM-ACDC.
*Previous model: KA-F
This smoke alarm adapter allows the installation of new Kidde alarm to existing Firex® wiring harnesses. When using this adapter, the power harness supplied with your new Kidde alarm is not used. You will need to remove the existing Firex® mounting plate and install the mounting plate supplied with your new Kidde alarm. Connect the KA-F2 adapter to the Firex® wiring harness then attach your Kidde alarm to the adapter. Secure the Kidde alarm to the mounting plate.
After installation, be sure that the AC power indicator is operating and test all your alarms following the instructions supplied by the alarm manufacturer for your specific alarm model. If the alarms are interconnected push the test button on each alarm and verify that all the interconnected alarms sound when any alarm is activated. The interconnect system should not exceed the NFPA interconnect limit of 12 smoke alarms.
Just let me say this, with the adapter from your company my fire alarms were converted in a couple of minutes per alarm (did six), Believe your price on the alarm itself is cheaper than amazon.