Product Description
ATTENTION: No returns/exchanges for any Generac parts.
GENERAC 0C30250SRV - Oil Pressure Switch Kit 10PSI 1/4-18 NC (replaces 0C3025)
- Model: 0C30250SRV
- Manufactured by: Generac
Generac 0C30250SRV Oil Pressure Switch Replacement Kit For Generac 0C3025 Pressure Switches. Has 10 PSI oil pressure actuation. Switch is normally closed (N.C.) meaning when oil pressure is applied at 10 PSI or more, the switch will open and allow the generator to run. Has 1/4"-18 threads.
This kit comes with 2 ring style terminals which much be crimped on in place of the 0C3025 sensor's push-on style connectors. The 0C3025 has been made obsolete and this kit is the current replacement. Should be installed using thread sealant (not included).
Use extreme caution when tightening this sensor into the block as the threads are tapered and will crack the block if over-tightened. This will result in the engine block needing replacement!
Generac replacement parts will also usually fit the following Generac branded generators: Honeywell, Guardian, Siemens, Carrier, Watchdog, Centurion, & Bryant.