Intermatic HB800RCL - Outdoor Digital Timer with Weatherproof Cover

 

1.Battery Holder (back of unit)
— two LR44 batteries keep time up to three months without power
2.Low Battery Indicator — programmed data is stored in non-volatile memory, so it won’t be lost when batteries are removed
NOTE: Replace the batteries as soon as possible after the low battery indicator appears.
3.Time Of Day (TOD) Display — the timer will automatically adjust for
Daylight Saving Time (DST) and changing dawn and dusk times for your location (Astronomic feature)
4.Pushbuttons
5.Two Timed, Grounded Outlets
6.Selector Knob
7.Reset Button
8.Day Of Week (DOW) Display — events can be programmed for just one day of the week, all the days of the week, just weekdays or just weekends
9.Event Display — the timer can be programmed for up to 28 total ON/OFF events per week
10.Mode Display — the timer can display several modes during setup and programming and three modes during operation: MANual, AUTO and RANDom. MANual allows for manual operation of the plugged-in devices, AUTO uses the timer’s exact settings and RANDom uses the timer’s settings varied by random 5-minute increments of ±30 minutes.
11.Output Status Indicator — this is the ON/OFF indicator. When the green light is on it means that the lamp or appliance should be on. If it is not on, the bulb may be burned out or the device may be turned off at the lamp or appliance.

NOTE: You may set up and program the timer before you plug it in. Be aware that while it is unplugged, the display will turn off to conserve battery power if there is no pushbutton activity for a few minutes. If this happens, simply push any button to turn the display back on.