GE IC200UAA007 - VersaMax Nano PLC

• Product type: Micro PLC
• Number of Inputs/Outputs: 16 In / 12 Out
• Power Voltage: 120/240 VAC
• Communication Ports: 2
• Input Device Voltage: 120 VAC
• Output Control Voltage: 120 VAC
• Dimensions (WxHxD) mm: 150x90x76
• Operating temperature: 0°C to +55°C
• Programming Software: VersaPro 1.1 or greater/ CIMPLICITIY Machine Edition Logic Developer
• Processor: Processor Operating at 28.0 MHz
• Execution time (Per Boolean Operation): 1.0 micro sec.
• Program Storage: Flash and Battery Backed RAM Option
• User Program Logic Memory: 9 K
• Real Time Clock: Yes
• Flash Memory: Yes
• Physical I/O Maximum: 140
• Discrete Inputs: 512
• Discrete Outputs: 512
• Discrete Global References: 1280
• Discrete Internal Coils (Battery Backed): 1024
• Discrete Temporary Coils: 256
• Status Bits: 128
• Registers: 2 K
• Analog and High Speed Counter Inputs: 128
• Analog Outputs: 128
• System Registers: 16
• Timers/Counters: 682
• Temporary Memory Data Retention (SuperCap): 30 Minutes
• Battery Back-Up Option: 4 Months at 40C
• Serial Ports: 2
• Protocols: SNP, SNP X (Breakless) RTU Slave (2 and 4 wire RTU Slave)
• Master/Slave: Master/Slave
• Modem Compatible: Yes
• Multi-Drop: Yes
• Serial Read and Write command support: Yes
• Serial port connector type: RJ-45 (RS-232) port 1 and DB-15 (RS-485 on port 2)
• Run/Stop Switch: Yes
• Removable I/O Terminal Strips: Yes
• Mounting: 35 mm DIN-Rail or Panel Mount
• Power Supply Voltage Range: 85 to 264 VAC
• Frequency (AC Power Supply): 50 -5% to 60 +5%
• Power Supply Hold-Up: 20 msec.
• Power Supply Inrush Time: 2 mS for 40 Amp
• Power Supply Inrush Currents: 30 Amp max. at 200VAC, 40 Amp max. at 265VAC
• Power Supply Input Current: 0.10 Amp typical at 100 VAC/0.06 Amp at 200 VAC
• Input Power Supply Rating: 16 VA
• 120 VAC Inputs Voltage Range: 85-132 VAC, 50 -5% to 60 +5% Hz
• 120 VAC Maximum Input Voltage: 132 Vrms, 50/60 Hz
• 120 VAC Input Current: 8 mA rms, (100 VAC, 60 Hz)
• AC Input Voltage On: Minimum 80 Vrms, 4.5 mA rms
• AC Input Voltage Off: Maximum 30 V rms, 2 mA rms
• Output Maximum Pilot Duty Rating: 0.5 Amp per point at 240VAC; 0.6 Amp max on Common 1 and Common 3; 1.2 Amps maximum on Common 2 and Common 4
• AC Outputs Voltage Range: 100 -15% to 240 +10% VAC, 50 -5% to 60 +5% Hz
• AC or DC Output Maximum Inrush Current: 5 Amp (1 period) / point 10 Amp (1 period) / common
• AC Output Maximum Resistive Load Current: 0.5 Amp / point (0.6 Amp max per common 1 and 1.2 Amp max per common 2)
• AC Output Maximum Voltage Drop When ON: 1.5 Vrms
• AC Output Maximum Leak Current When OFF: 1.8 mA rms (115 VAC) and 3.5 mA rms (230 VAC)
• AC Output Response Time OFF to ON: Maximum 1 msec.
• AC Output Response Time ON to OFF: Maximum 1 msec. + 1/2 cycle period
• Analog Potentiometer Input Channels: 2
• Analog Input Potentiometer Input Ranges: 0 to 1024
• Resolution: 10 bits
• Analog Input Potentiometer Input Filter Time: Configurable
• Industrial Control Equipment [Safety]: UL508, CSA C22.2 No. 142-M1987
• Hazardous Locations [Safety] Class I, Div II, A, B, C, D: UL1604, CSA C22.2 No. 213-M1987
• European EMC Directive: CE Mark
• Vibration: 2 G @ 57-500 Hz, 0.15 mm p-p @ 10-57 Hz
• Shock: 15 G, 11 ms
• Storage temperature: -10°C to +75°C
• Humidity: 5% to 95%, non-condensing
• Enclosure protection: Enclosure per IP54: protection from dust and splashing water
• Radiated, Conducted: Group 1, Class A part 15, subpart J
• Electrostatic Discharge: 8 KV Air Discharge, 4 KV Contact Discharge
• Radiated RF ENV 51140, ENV 50204: 10 V rms/m, 80 MHz to 1000 MHz, modulated
• Fast Transient Burst: 2 KV for Powersupply and 1 KV for I/O and communications
• Surge Withstand: Power >50 V, 2 KV (line to ground), 1 KV (line to line) supply
• Conducted RF: 10 V, 150 KHz to 80 MHz injection for momm cables greater than 30 meters
• Dielectric Withstand: 1.5 kV for modules rated from 51 V to 250 V
• Input Dips, Variations: During Operation: Dips to 30% and 100%, Variation for AC ±10%, Variation for DC ±20%