GE IC200NDR001 - VersaMax Nano PLC Power Supply

• Product type Nano PLC
• Number of Inputs/Outputs: 6 In / 4 Out
• Power Voltage: 24 VDC
• Communication Ports: 1
• Input Device Voltage: 24 VDC
• Output Control Voltage: Relay Out
• Maximum Number of PWM/Pulse: 0
• Maximum Type A Counters: 2
• Maximum Type B Counters: 1
• Dimensions (WxHxD) mm: 75x80x47
• Operating temperature: 0°C to +55°C
• Programming Software: VersaPro 1.1 or greater/ CIMPLICITIY Machine Edition Logic Developer
• Processor: Processor Operating at 28.0 MHz
• Execution time (Per Boolean Operation): 1.2 micro sec.
• Program Storage: Flash
• User Program Logic Memory: 2 K
• Real Time Clock: No
• Flash Memory: Yes
• Physical I/O Maximum: 10
• Discrete Inputs: 512
• Discrete Outputs: 512
• Discrete Global References: 1280
• Discrete Internal Coils (Battery Backed): 1024 (No battery back up available)
• Discrete Temporary Coils: 256
• Status Bits: 128
• Registers: 256
• Analog and High Speed Counter Inputs: 128
• Analog Outputs: 128
• System Registers: 16
• Timers/Counters: 84
• High Speed Counter - Type A and B: 10 kHz
• Serial Ports: 1
• Protocols: SNP, SNP X (Breakless) RTU Slave (2 and 4 wire RTU Slave)
• Master/Slave: Slave
• Modem Compatible: Yes
• Multi-Drop: Yes with RS-485 Adapter (IC200ACC415 RS-232 to RS-485)
• Serial Read and Write command support: Yes
• Serial port connector type: RJ-45 (RS-232)
• Run/Stop Switch: Yes (External)
• Removable I/O Terminal Strips: No
• Mounting: 35 mm DIN-Rail or Panel Mount
• Power Supply Voltage Range: 19.2 VDC to 30 VDC
• Power Supply Hold-Up: 10 msec.
• Power Supply Inrush Currents: 1 Amp typical at 30VDC
• Power Supply Input Current: 0.12 A typical at 24VDC
• Input Power Supply Rating: 8 watts internal
• DC Inputs Voltage Range: 0 to 30 VDC
• DC Input Current: 7.5 mA Typical
• DC Input Resistance: 2.8 kOhms
• DC Input Threshold Voltage ON: 15 VDC min.
• DC Input Threshold Voltage OFF: 5 VDC max.
• DC Input Threshold Current ON: 4.5 mA max.
• DC Input Threshold Current OFF: 1.5 mA min.
• DC Input Response Time: 0.5 to 20 ms configurable as regular inputs
• Output Maximum Pilot Duty Rating: 2 Amps at 5 VDC and 240 VAC
• AC or DC Output Maximum Inrush Current: 5 amps per half cycle
• AC Output Maximum Resistive Load Current: 2 amps at 5VDC and 240VAC
• Relay Operating Voltage: 5 to 30 VDC and 5 to 250 VAC
• Relay Leakage Current: 15 mA at 240VAC Maximum
• Relay Maximum Resistive Load Rating: 2 Amps at 5 VDC and 240 VAC
• Relay Minimum Load: 10 milliamp
• Relay On Response Time: 15 ms maximum
• Relay Off Response Time: 15 ms maximum
• Relay Contact Life: Mechanical 20 million and 200,000 electrical operations resistive load of 2 A
• Industrial Control Equipment [Safety]: UL508, CSA C22.2 No. 142-M1987
• Hazardous Locations [Safety] Class I, Div II, A, B, C, D: UL1604, CSA C22.2 No. 213-M1987:
• European EMC Directive: CE Mark
• Vibration: 2 G @ 57-500 Hz, 0.15 mm p-p @ 10-57 Hz
• Shock: 15 G, 11 ms
• Storage temperature: -10°C to +75°C
• Humidity: 5% to 95%, non-condensing
• Enclosure protection: Enclosure per IP54: protection from dust and splashing water
• Radiated, Conducted: Group 1, Class A part 15, subpart J
• Electrostatic Discharge: 8 KV Air Discharge, 4 KV Contact Discharge
• Radiated RF ENV 51140, ENV 50204: 10 V rms/m, 80 MHz to 1000 MHz, modulated
• Fast Transient Burst: 2 KV for Powersupply and 1 KV for I/O and communications
• Surge Withstand: Power >50 V, 2 KV (line to ground), 1 KV (line to line) supply
• Conducted RF: 10 V, 150 KHz to 80 MHz injection for momm cables greater than 30 meters
• Dielectric Withstand: 1.5 kV for modules rated from 51 V to 250 V
• Input Dips, Variations: During Operation: Dips to 30% and 100%, Variation for AC ±10%, Variation for DC ±20%